The recurring Glasgow problem: furniture that was assembled in the room and will not come back out through the stair turn. It is the single most common reason a move takes longer than planned, and it is entirely predictable if you check beforehand.
Here is what crews will dismantle as standard, what needs arranging, and what genuinely cannot be taken apart. Our furniture removals team handles this daily.
Included as standard
- Bed frames — divans, slatted frames, most metal frames
- Flat-pack wardrobes and units where they were designed to come apart
- Table legs on dining and coffee tables
- Sofa feet and detachable arms where fitted
- Shelving units that unbolt
- Wall brackets for TVs, where you have the fittings
Needs arranging in advance
| Item | Why |
|---|---|
| Fitted or built-in wardrobes | Often not designed to be removed intact |
| Solid wood wardrobes | Heavy, and not always demountable |
| Corner sofas | May need the frame separating, if it separates at all |
| Cabin and bunk beds | Time-consuming, needs the right fittings |
| American-style fridges | Doors may need removing to clear a doorway |
| Garden sheds and outbuildings | A separate job, not a removals task |
What cannot be taken apart
Some furniture was glued, dowelled or built in place, and there is no version of it that comes back out whole. Older solid wood wardrobes and some corner sofas fall into this category.
Where an item genuinely will not go, the options are a window lift where safe and permitted, or disposal and replacement. Both cost more than a straightforward carry and both need deciding in advance rather than on the morning — which is the whole reason to measure first.
The measurement that decides it
Not the stair width. The diagonal clearance at the half-landing turn — the point where the staircase doubles back and the item has to pivot. Measure corner to corner there, then measure your item diagonally.
Also measure the close entrance at its narrowest point, which is sometimes the blocker before the stairs are even reached. Our tenement moving guide walks through the full checklist.
Practical preparation
- Photograph each item before dismantling, from two angles
- Bag and label all fittings, taped to the item they belong to
- Keep assembly instructions if you still have them, or find the model online
- Note which way round panels go — pencil marks on the inside help
- Tell us in advance what needs dismantling so the time is in the quote
A note on flat-pack that has moved before
Cam-lock flat-pack furniture weakens each time it is taken apart and rebuilt. Something that has already moved twice may not survive a third dismantle in usable condition.
That is not a reason to avoid moving it, but it is worth factoring in when deciding what to take. If a wardrobe is on its third move and the panels are already soft around the fixings, replacing it may be cheaper than moving it — and a clearance at the same time costs less than a separate trip.
What it adds to the cost
Basic dismantling and reassembly of beds and standard flat-pack is included in a normal booking. Extensive work — multiple wardrobes, cabin beds, a corner sofa frame — adds crew time and should be quoted rather than assumed.
Tell us at enquiry stage. It is a small addition when planned and a significant delay when discovered.
Frequently asked questions
Do you reassemble at the new property?
Yes, for anything we dismantled. Tell us in advance so the time is built into the quote.
What if a fitting breaks?
Standard cam locks and dowels are usually replaceable. Tell us about anything with unusual fittings beforehand.
Will you take apart a fitted wardrobe?
Usually not — fitted units are often not designed to come out intact. We will advise before the day.
What if my sofa will not fit down the close?
We assess the route before booking. You will know in advance, not on the morning.
Not sure what will fit? Send a photo of the stairwell and your largest items and we will tell you honestly what comes apart and what does not. Get a free fixed quote or call +44 7424 958288.
